Online Reservation


Reservation will be confirmed by email.
Please check the reservation schedule before submitting reservation. Thank you.

Service Request Form - Probe Station
Name of Company/Institution:
Department:
Address:
User Name:
Title / Position:
Contact Phone Number:
E-Mail:
Date of Use (dd/mm/yyyy):
Time of Use (from hh:mm - to hh:mm):
Description of Job Request:
Special Request:

Do you accept priority rate (See "Notes 3 to 5" of the SPADE Center Charging Scheme.) to request this job to be performed during non-office hours?
(See "Step 9" of the Procedure for Online Reservation.)


Do you accept priority rate (See "Notes 3 to 5" of the SPADE Center Charging Scheme.) to prevent this job from being preempted by other jobs submitted later?
(See "Step 9" of the Procedure for Online Reservation.)


Do you accept priority rate (See "Notes 3 to 5" of the SPADE Center Charging Scheme.) to request this job preempting other jobs already on queue?
(See "Step 9" of the Procedure for Online Reservation.)


Will you have your staff present in the SPADE Center to monitor this job during the reserved time period?


Do you want to continue the job request when the time needed to perform the request exceeds the duration of the time booked by this reservation?
(This option will only be available if there is no other customer's job following your reserved time slot.)


Additional information
Please provide sufficient and accurate details concerning this job request.
If you fail to provide such details, the SPADE Center may not be able to provide such kinds of service,
or the time duration needed to provide such kinds of service may be longer than usual.


Decapsulation operation required?
(If Decapsulation operation is needed, please submit an additional job request for Decapsulation operation.)

Dimensions of probing area:
(Passive probe needles of various probe tip sizes are currently available and charged from HK$70 to HK$100 per needle.
Active probe needles with 0.1 um probe tips are currently available at HK$250 per needle.)


Type of probe needed:
(* An additional charge of HK$300 per hour will be charged for using Active Probe.)


Passive probe is suitable for measuring static DC voltage level or
driving signals to a circuit.
Active probe is suitable for acquiring dynamic signals of the circuit.

Number of passive probe needed:


Number of active probe needed:


General Electrical Instrument required?
(DC Power Supplies, Digital Multimeters are provided free of charge. If Oscilloscopes, Signal Generators, etc., are needed, please submit an additional job request for General Electrical Instrument.)



I have read and agree to the Terms and Conditions of the SPADE Center.

  


Home | Notice Board | Introduction to SPADE | Codes of Practice | Equipment Introduction | Charging Scheme | Reservation Schedule | Procedure for Online Reservation | Online Reservation | Booking Cancellation | Contact Us